M1000 Series MPO (MTP) OM3 SR10 24 Fibre Patch Cables

For SR10 100G and 120G

Product Series M1000 SR10
Polarity SR10 (100GBASE-SR10)
Fibre Type OM3 (50/125)
Fibre Capacity 24
Glass Fibre Corning Clearcurve®
Cable diameter 3.8mm or 5.6mm
Connector End 1 MTP® ELITE 24 fibre female
Connector End 2 MTP® ELITE 24 fibre female
Connector Housing Aqua
Insertion Loss across cable < 0.45 dB
Product Warranty 25 year fully covered

M1000 patch cords offer connectivity over multimode OM3 fibre. Direct connection between two 100G CFP transceiver ports (unpinned connectors) and connection from a 100G MTP trunk cable to a CFP transceiver port (typically pinned and unpinned connectors).

M1000 Series uses only the MTP ELITE connectors

Complete Connect only uses MTP ELITE connectors for its 40G and 100G range of products. By using this connector, high quality OM3 fibre cable with Corning Clearcure glass cores and rigorous termination processes, Complete Connect guarantees exceptional optical performance.

Complete Connect are MPO MTP Specialists with 40+ years experience. Learn more About Us.

Technical Drawing
100G MTP trunk cable 24 fibre
Polarity 100G
Further Information

Single Sheath 24 fibre micro core cable with a 3.8mm diameter

For the best bend radius
24 fibre micro core loose tube cable

Dual Sheath 24 fibre micro core cable with a 5.6mm diameter

For extra protection
24 fibre micro core loose tube cable dual sheath ruggedised

Cleaning MTP cables and transceiver ports

MPO MTP Cleaning Tool
Optical And Physical Specifications
MTP Multimode OM3 24 Fibre Connector

Complete Connect only use the MTP connector with the ELITE low loss UPC ferrule. Universally compatible with all transceivers and other cabling systems.

Connector Housing Aqua
Ferrule MT ELITE
Typical Insertion Loss 0.10 dB (average)
Maximum Insertion Loss 0.35 dB (Max)
24 Core Physical Specification
Single Sheath Dual Sheath
Weight kg/Km 12 28
Outer Diameter 3.8mm 5.6mm
Sheath Wall Thickness (nominal ave. mm) 0.55mm Inner 0.55mm, outer 0.45mm
Sheath Wall Thickness (minimum mm) 0.48mm Inner 0.48mm, outer 0.35mm
Maximum pull force (N) 300 N 1000 N
Transport and storage – 25 °C to + 70 °C – 25 °C to + 70 °C
Installation – 5 °C to + 50 °C – 5 °C to + 50 °C
Installed – 10 °C to + 70 °C – 10 °C to + 70 °C
Minimum Bend Radius (installed) 10 x outside diameter 10 x outside diameter
Minimum Bend Radius (installation) 15 x outside diameter 15 x outside diameter
Maximum Crush Resistant (long term) 150 N/dm 300 N/dm
Jacket Colour OM3 – Aqua OM3 – Aqua
24 Core Construction
Single Sheath Dual Sheath
Design Twenty four 250um fibres with aramid yarn strain relief
Single sheath
Twenty four 250um fibres with aramid yarn strain relief
Dual sheath separated by aramid yarn strain relief
Construction Dry Loose Tube (no gel) Dry Loose Tube (no gel)
Sheath Properties LSZH – Halogen free, flame retardant LSZH – Halogen free, flame retardant
Application Indoor, cable trays and ducting Indoor, cable trays and ducting
Fire Performance
Flame Retardancy acc. IEC 60332-1-2 and IEC 60332-3-22 Cat. A
Smoke Density acc. IEC 61034
Halogen-free acc. IEC 60754-1
Acidity of Combustion Gases acc. IEC 60754-2
Cable Design
Multimode OM3
Optical Core 50μm +/- 2.5μm diameter
Optical Claddinng 125μm +/- 1μm diameter
Primary Acrylate Coating 242μm +/- 5μm diameter
Core Concentricity 1.5μm
Core Concentricity Error <5%
Optical Performance
Multimode OM3 (50/125)
Attenuation Coefficient
dB/Km (installed)
850nm ≤ 2.5 Max
1300nm ≤0.7 Max
Attenuation Coefficient
dB/Km (un-installed)
850nm ≤ 2.3 Max
1300nm ≤0.6 Max
Overfill Launch Minimum
Bandwidth Mhz x Km
850nm ≥ 1500
1300nm ≥ 500
Laser Effective Modal Minimum
Bandwidth Mhz x Km
850nm ≥ 2000
Commitment to Excellence

Complete Connect are committed to providing the highest quality performing products. This is achieved through

  • Sourcing the best components
  • Utilising the lastest fibre termination technology
  • Maintaining rigorous processes
Cable Standards

TIA/EIA-568-C.3 and ISO/IEC 11801

Connector Standard

MPO: IEC-61754-7, EIA/TIA-604-5
Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC
LC: IEC-61754-20
SC: IEC-61754-14

Further Information
Compatibility with transceiver modules
  1. All CFP 100GBase-SR10 transceiver modules have ports with male connections (with guide pins).
  2. The MTP cable needs a female connector (no pins)
  3. Transceivers from the leading switch manufacturers such as CISCO, Juniper, Extreme, HP, Dell, Arista and Brocade all use an MT 24 fibre ferrule.
  4. All Complete Connect 100G cables use the MT Elite 24 fibre ferrule within the MTP connector. This provides the best optical connection with all major CFP transceivers. Some MPO connectors wont perform as well.
Cleaning MTP cables and transceiver ports
  1. Complete Connect recommend using an IBC Branded MTP cleaning tool for cleaning all MTP cables and CFP transceiver ports.
  2. Complete Connect will supply this free of charge on orders of four or more 100G cables
Maximum transmission distances
  1. The IEEE standard states that 100G can be transmitted at the following distances: OM3 less than 100m; OM4 less than 150m.
Testing using Loopback adaptor cables
  1. 100G loopback cables can be used to test individual components or networks.


+44 (0) 20 8286 6529

Back to Top