M1000 100G Conversion Cables: 100G over 10G MTP Trunks
Part Number | |
Polarity | |
Fibre Type | OM3 (50 / 125), OM4 (50 / 125), OS2 (9 / 125) |
Fibre Capacity | 24 |
Glass Fibre | Corning Clearcurve® |
Fibre Construction | Dry loose tube micro cable LSZH |
Cable Diameter | 3.8mm or 5.4mm |
End 1 | MTP® ELITE 24 Fibre Connector (x1) |
End 2 | MTP® ELITE 12 Fibre Connector (x2) |
Insertion Loss across cable | < 0.35 dB + cable loss |
Product Warranty | 25 year fully covered |
100GBASE-SR10 Fibre Conversion Cables
100G MTP conversion cables are used to allow existing 10G MTP 12 fibre trunk cables to carry 100G channels. The 100G signal is split equally across two 12 fibre trunks which were previously installed within a traditional MTP modular network. These conversion cables are compatible will all brands of structured cabling with the polarity altered to match the incumbent cabling’s polarity; 100G CFP transceiver port (unpinned connector) and SFP+ (x 10) ports and 100G CFP transceiver port to LC patch panels.
Components
All M1000 cables are made from the highest quality components and use MTP® ELITE® 24 fibre UPC connectors, MTP® ELITE® 12 fibre UPC connectors and Corning® ClearCurve® 24 core micro fibre cable. Complete Connect M1000 Series cables are also compatible with all major transceiver brands as they use the same fibre ferrule (MT ferrule) as used in the transceivers. M1000 Series cables are also compatible with other manufacturer’s cabling such as the Corning Pre-tium EDGE, Systimax 360 or Panduit Quicknet solutions.