M310 Series MPO (MTP) OM4 24 Fibre Trunk Cables

M Series 10G and 25G Modular Cassette Networking

Part Number M314-EFEF-24LS-S-NS-XXX-C
Polarity C (standard). A and B available
Fibre Type OM4 (50 / 125)
Fibre Capacity 24
Glass Fibre Corning Clearcurve®
Fibre Construction Dry loose tube micro cable LSZH
Cable Diameter 3.8mm or 5.6mm
End 1 MTP® ELITE 12 Fibre Connector (x2)
End 2 MTP® ELITE 12 Fibre Connector (x2)
Insertion Loss across cable < 0.35 dB + cable loss
Product Warranty 25 year fully covered

M310 Series MTP® trunk cables form the backbone to the M Series solution. They are designed for a tool-less installation with MX and M310 modular cassettes or MX and M310 couplers and utilise Click-2-Connect® technology for a fast and simple way to grow the network.

MPO MTP® ELITE® low loss connectors with level 6 multistage termination

MTP® trunk cables use a lightweight but robust micro core fibre cable and MTP® connectors. They are about 65% lighter and 60% smaller in diameter than traditional tight buffered or loose tube fibre and gives the ability to install more fibre into less space. All trunk cables have a full lifetime guarantee and are protected by the Complete Connect warranty. Every trunk cable is supplied with a full test certificate and is traceable though a unique serial number.

Complete Connect are MPO MTP Specialists with 20+ years experience. Learn more About Us.

M310 Series 24 Fibre Trunks With MPO (MTP) 24 Fibre Cassettes
Technical Drawings

M310 Series MTP Trunk Cable with Single Sheath

10G MTP - MTP 24 fibre trunk cable
24 fibre micro core loose tube cable

M310 Series MTP Trunk Cable with Dual Sheath

m310 mpo mtp 24 fibre dual sheath trunk cable

To ensure the best performance, use a recognised MTP Connector and QSFP + Port Cleaning Tool

MPO MTP Cleaning Tool
Optical Performance And Physical Specifications
MPO (MTP) OM4 12 fibre Connector
Connector Housing Aqua
Ferrule MT ELITE
Typical Insertion Loss 0.10 dB (average)
Maximum Insertion Loss 0.35 dB (Max)
MTP 12 Fibre Male Connector
24 Core Physical Specification
Single Sheath Dual Sheath
Weight kg/Km 12 28
Outer Diameter 3.8mm 5.4mm
Sheath Wall Thickness (nominal ave. mm) 0.55mm Inner 0.55mm, outer 0.45mm
Sheath Wall Thickness (minimum mm) 0.48mm Inner 0.48mm, outer 0.35mm
Maximum pull force 300 N 1000 N
Transport and storage – 25 °C to + 70 °C – 25 °C to + 70 °C
Installation – 5 °C to + 50 °C – 5 °C to + 50 °C
Installed – 10 °C to + 70 °C – 10 °C to + 70 °C
Minimum Bend Radius (installed) 10 x outside diameter 10 x outside diameter
Minimum Bend Radius (installation) 15 x outside diameter 15 x outside diameter
Maximum Crush Resistant (long term) 150 N/dm 300 N/dm
Jacket Colour OM4 – Aqua OM4 – Aqua
24 Core Construction
Single Sheath Dual Sheath
Design Twenty four 250um fibres with aramid yarn strain relief
Single sheath
Twenty four 250um fibres with aramid yarn strain relief
Dual sheath separated by aramid yarn strain relief
Construction Dry Loose Tube (no gel) Dry Loose Tube (no gel)
Sheath Properties LSZH – Halogen free, flame retardant LSZH – Halogen free, flame retardant
Application Indoor, cable trays and ducting Indoor, cable trays and ducting
Fire Performance
Flame Retardancy acc. IEC 60332-1-2 and IEC 60332-3-22 Cat. A
Smoke Density acc. IEC 61034
Halogen-free acc. IEC 60754-1
Acidity of Combustion Gases acc. IEC 60754-2
Cable Design
Multimode OM4
Optical Core 50μm +/- 2.5μm diameter
Optical Claddinng 125μm +/- 1μm diameter
Primary Acrylate Coating 242μm +/- 5μm diameter
Core Concentricity 1.5μm
Core Concentricity Error <5%
Optical Performance
Multimode OM4 (50/125)
Attenuation Coefficient
dB/Km (installed)
850nm ≤ 2.5 Max
1300nm ≤0.7 Max
Attenuation Coefficient
dB/Km (un-installed)
850nm ≤ 2.3 Max
1300nm ≤0.6 Max
Overfill Launch Minimum
Bandwidth Mhz x Km
850nm ≥ 3500
1300nm ≥ 500
Laser Effective Modal Minimum
Bandwidth Mhz x Km
850nm ≥ 4700
 Commitment to Excellence

Complete Connect are committed to providing the highest quality performing products. This is achieved through

  • Sourcing the best components
  • Utilising the lastest fibre termination technology
  • Maintaining rigorous processes

LC: IEC-61754-20
SC: IEC-61754-14

Cable Standards

TIA/EIA-568-C.3 and ISO/IEC 11801

Connector Standard

MPO: IEC-61754-7, EIA/TIA-604-5
Compliant to Directive 2002/95/EC (RoHS) and REACH SvHC

Further Information

Compatibility with LC cassette modules

  1. M310 trunk cables offer instant connectivity when used with M310 LC modular cassettes
  2. M310 trunks are compatible with other MTP based systems such as Panduit, Corning, Siemon plus many others
  3. The MTP trunks can have either male or female connectors
  4. There are 3 types of cable polarity: A, B or C. Complete Connect will ensure the correct polarity is provided.
  5. All Complete Connect cables use the MT Elite ferrule within the MTP fibre connector. This provides the best optical connection possible.

Maximum transmission distances

  1. The IEEE standard states maximum distances based on loss budgets for OM3, OM4 and singlemode transmission.
  2. Distances vary depending on a number of factors including no. of mated connector pairs and cable routing.
  3. Complete Connect’s technical team can provide all the relevant information concerning loss budgets and allowable distances.

Testing using Loopback adaptor cables

  1. MTP loopback cables can be used to test individual trunk cables.
  2. LC loopback adaptors can be used to test full channels.


+44 (0) 20 8286 6529

Back to Top