MTP® (MPO) Patch Cable OM4 12 Fibre | 40G 100G 400G
M400 Series® | Cca-s1b,d0,a1 | US Conec® Partner
Other lengths available on 7 day lead time
Free UK Delivery: Next day with DHL Express
Europe 1-2 Day Delivery: £40.00
30-day return A full refund will be given for products sold from stock and returned in re-saleable condition with original packaging and test certificates
25-year warranty All our cables are guaranteed to work with all transceivers and MPO systems that meet with international standards
CPR fire compliant Compliance varies across the EU. Plenum (for the USA) and standard LSZH (for the far east) sheaths are unlikely to be compliant. Chat to us for more information
DHL Express delivery
Compatibility assured These cables will work with any QSFP type transceiver with an MPO-12f port or any MPO system that meet the international standards.
M400 Series Base-8 cabling
Supporting SR4 40G and 100G and SR4.2 400G over multimode fibre
Complete Connect’s M400 Series MTP® (MPO) contains a full range or patch cords, breakouts, conversion cables and trunks for SR4 connectivity over multimode or PSM4 over singlemode fibre.
QSFP+, QSFP28 QSFP-DD direct connect
MTP® (MPO) 12 fibre patch cables are mainly used to directly connect between QSFP type SR4 or SR4.2 transceivers or to connect these transceivers to MTP® (MPO) trunks. Polarity B MTP® (MPO) patch cables with female connectors will enable a direct connection for SR4 transmission between two QSFP type transceivers.
Patch to MTP® (MPO) trunk cables
We also stock MTP® (MPO) patch cables that can connect to MTP® (MPO) trunks/backbones. These will typically also be polarity B but will have different gender connectors (male to female).
The polarity and gender of your patch cords will depend on your network layout and type of MTP® (MPO) adaptor used.
Applications
- 40G SR4 (QSFP+)
- 100G SR4 (QSFP28)
- 200G SR4 (QSFP-DD)
- 400G SR4.2 (QSFP-DD)
Transceiver to transceiver connection
These transceivers all require a type B cable with female MTP® (MPO) connector.
Product Series | M400 |
Polarity | Type B (Type A also in stock) |
Cable | 12 fibre micro core cable for internal use |
Cable Diameter | 3 mm |
Glass Cores | Corning Clearcurve® OM4 |
MTP (MPO) End 1 | MTP Elite® 12 fibre UPC |
MTP (MPO) End 2 | MTP Elite® 12 fibre UPC |
Insertion Loss | Typical < 0.12 dB | 97% of channels ≤ 0.25 dB |
Return Loss | ≥ 25 dB |
Product Warranty | 25 years |
CPR Compliance
Within Scope of CPR | Yes |
Euroclass | Cca-s1b,d0,a1 |
Quality Guaranteed
- MTP Elite® low loss connector
- Corning® glass cores
- CRP compliant
- Full test certification included
Online chat
Our team are available
to offer support
Length
Minimum | 0.20m |
MTP® (MPO) Connectors
Housing | Red. Blue. Violet. Green |
Easy Release | One end or both ends |
MTP® PRO | With separate pins included |
Cable
Diameter | 4.5 mm dual sheath |
Colour | Red. Blue. Green |
Labels | Bespoke wrap around or tags |
Industry leading
glass
All our MTP cables use
Corning ClearCurve® bend
insensitive glass cores
Glass Core | Corning® Clearcurve® OM4 |
Standards | IEC 60793-2-10 Type A1.a3 ITU G651.1 |
OMB @ 850 nm | 3500 MHz⋅km to IEC 60793-1-41 |
OMB @ 1300 nm | 500 MHz⋅km to IEC 60793-1-41 |
Att. @ 850 nm | ≤ 2.3 dB/km |
Att. @ 1300 nm | ≤ 0.6 dB/km |
EMB | 4700 MHz⋅km to IEC 60793-1-49 |
MTP® Connector
Ferrule | MT Elite® |
IL (typical) | ≤ 0.12 dB |
IL (<97%) | ≤ 0.25 dB |
Return Loss | > 25 dB |
Partnering for
over a decade
All our MPO cables
use MTP Elite® or
MTP® Pro connectors
Create a Base-8 SR4 or SR4.2 network
WHY CHOOSE OUR CABLES
-
High optical performance
Factory direct connector terminations with multi-stage machine polishing.
-
25 year warranty
Every product comes with our complete 25 year warranty and a full test certificate.
-
Large stock holding
Including male and female connectors, polarity types A and B as well as OM4.
-
Fast and helpful service
Talk directly to people who know fibre cabling. Always available.
-
Full MTP® (MPO) product range
The M400 Series has cabling, cassettes, modules and panels to meet all needs.
-
Buy from a specialist
Being focused only on high data rate cabling we can offer you a better all round service.
Cable Fire Rating Requirements and CPR
European (including UK) Fire Rating Requirements for Data Cables
The introduction of the Construction Products Regulation (CPR) in 2017 updated the cable sheath fire rating requirements for data cables. Although the rating system was harmonised (Euroclass system), the implementation of CPR was down to each country’s national standards body. This means that the fire rating required in a particular location is both country and application specific. The majority of countries require Dca rated cables as a minimum for patch cables and Cca or higher for trunk cables.
Bca rated cables
Depending on application, some countries require Bca rated cables. Please contact us directly for Bca rated cables. Please contact us directly for these cables.
Plenum OFNP rated cables are not covered within EU/UK regulations
Plenum sheath is specified within regulations in the USA. Plenum sheath cables would not automatically meet with EU fire rating requirements.
CPR Compliant
Construction Products
Regulations
Generic verus Specific brand
MPO is the generic name for “multi-fibre push-on” connectors as opposed to single fibre connectors such as LC or SC. There are many manufacturers of MPO connectors each with varying degrees of performance. MTP® is a brand of MPO connector made by US Conec®.
All MPO connectors have a floating ferrule which is aligned using guide pins and help against the opposing MPO ferrule with a spring. The manufactured tolerance of the ferrule and the quality of the springs are key factors in determining the lifetime performance of the connector. MTP® connectors have a very low manufactured tolerance and a high spring force which ensures continued performance over time.
For more information – Differences between generic MPO connectors and the higher performing MTP® (MPO) connector.
M400 Series MTP® (MPO) patch cable with dual sheath
Compatibility with QSFP type Base-8 transceivers
- All QSFP type transceivers with MPO-12f ports have male ferrules (with guide pins) and require MTP® (MPO) cables with female connectors (no pins).
- Transceivers from the leading switch manufacturers such as CISCO, Juniper, Extreme, HP, Dell, Arista and Brocade all use an MT ferrule which is the same ferrule as used in the MTP® connector.
- All Complete Connect Base-8 MTP cables use the MT Elite® ferrule with the MTP® 12 fibre connector. This provides the best optical connection with all major QSFP type Base-8 transceivers. Some MPO connectors do not perform as well.
Cleaning MTP® (MPO) cables and transceiver ports
Complete Connect recommend using an IBC® MTP® cleaning tool for cleaning all MTP® cables and QSFP+ transceiver ports. These are in stock.
Testing 40G or 100G ports or cables
An M400 Series loopback test cable can be used to test these ports.
Complete Connect’s M400 Series MTP® patch cables are for connection between ports in racks within data centre environments to create SR4 and PSM4 direct connections. Available in polarity B these MTP® patch cables enable connection between QSFP+ and QSFP28 transceiver ports or between transceivers and MTP® adaptor ports to connect to M400 trunk cables for connection to adjacent racks, pods of racks or distribution areas.
M400 Series patch cables are compatible with all transceivers and other MTP® trunk systems without any loss of performance including BASE-8 fibre systems.
M400 Series cables have a micro cable construction which gives them a small diameter, a low weight per meter and a low bend radius. Their intended use is to run between data racks in easily accessible overhead cable trays or open ducting systems separate from power cables or heavier copper cables.