MTP® (MPO) 16 Fibre OM4 (50/125) Patch Cable | SR8 400G
M800 Series | MTP16f® connector
Lead time: 7 – 10 working days to dispatch
Chat to us: for project discounts, other lengths or for technical/sales support
7 day lead time
25 year warranty All our cables are guaranteed to work with all transceivers and MPO systems that meet with international standards
CPR fire compliant Compliance varies across the EU. Plenum (for the USA) and standard LSZH (for the far east) sheaths are unlikely to be compliant. Chat to us for more information
UK Free delivery Europe 1 to 2 day from £35. Rest of world charges vary.
MPO Compatible These patch cables will work with any MPO system that meet the international standards.
MTP (MPO) Patch Cables for 400G SR8
M800 Series
Complete Connect’s M800 Series MTP® (MPO) contains a full range or patch cords, breakouts, conversion cables and trunks for SR8 connectivity over multimode or PSM8 over singlemode fibre.
QSFP+ and QSFP-DD direct connect
MTP® (MPO) 16 fibre patch cables are mainly used to directly connect between QSFP+ (or QSFP-DD) transceivers or to connect these transceivers to MTP® (MPO) trunks. Polarity B MTP® (MPO) patch cables and with female connectors will enable a direct connection for SR4 transmission between two QSFP+ (QSFP-DD) type transceivers.
Patch to MTP® (MPO) trunk cables
We also stock MTP® (MPO) patch cables that can connect to MTP® (MPO) trunks/backbones. These will typically also be polarity B but will have different gender connectors (male to female).
The polarity and gender of your patch cords will depend on your network layout and type of MTP® (MPO) adaptor used.
Online chat
Our team are available
to offer support
Partnering for
over a decade
All our MPO cables
use MTP Elite® or
MTP® Pro connectors
Standard stock
Product Series | M800 SR8 |
Polarity | Type B – 400G direct connect |
Cable | 16 fibre micro core cable for internal use |
Cable Diameter | 3 mm |
Glass Cores | Corning Clearcurve® OM4 |
MTP (MPO) End 1 | MTP ELITE® 16 fibre APC with offset key |
MTP (MPO) End 2 | MTP ELITE® 16 fibre APC with offset key |
Insertion Loss | < 0.12 dB mean; < 0.25 @ <97% |
Return Loss | ≥ 25 dB |
Product Warranty | 25 years |
CPR Compliance
Within Scope of CPR | Yes |
Euroclass | Cca-s1 d1 a2 |
Polarity
Type A | Made to order |
Type C | Made to order |
MTP (MPO) Connectors
Gender | Male or female |
Housing Colour | Red. Blue. Violet. Green |
Push Pull Tabs | One end or both ends |
Cable
Cable Diameter | 4.5 mm dual sheath |
Sheath Colour | Red. Blue. Green |
Labels | Bespoke wrap around or tags |
Buy from a UK
based company
Our team are available
to offer support
Corning® Clearcurve® Glass Cores
Glass Core | Corning® Clearcurve® OM4 |
Standards | IEC 60793-2-10 Type A1.a3 ITU G651.1 |
OMB @ 850 nm | 3500 MHz⋅km to IEC 60793-1-41 |
OMBh @ 1300 nm | 500 MHz⋅km to IEC 60793-1-41 |
Att. @ 850 nm | ≤ 2.3 dB/km |
Att. @ 1300 nm | ≤ 0.6 dB/km |
EMB | 4700 MHz⋅km to IEC 60793-1-49 |
MTP® Connector
Ferrule | MT Elite® |
IL (typical) | ≤ 0.12 dB |
IL (<97%) | ≤ 0.25 dB |
Return Loss | > 25 dB |
Industry leading
glass
All our MTP cables use
Corning ClearCurve® bend
insensitive glass cores
Create a 400G network
Related and alternative products
MX Series 2U Housing Panel
For 12 MX cassettes or modules
Ideal for distribution areas
WHY CHOOSE OUR CABLES
-
High optical performance
Factory direct connector terminations with multi-stage machine polishing.
-
25 year warranty
Every product comes with our complete 25 year warranty and a full test certificate.
-
Large stock holding
Including male and female connectors, polarity types A and B as well as OM4.
-
Fast and helpful service
Talk directly to people who know fibre cabling. Always available.
-
Full MTP® (MPO) product range
The M400 Series has cabling, cassettes, modules and panels to meet all needs.
-
Buy from a specialist
Being focused only on high data rate cabling we can offer you a better all round service.
Cable Fire Rating Requirements and CPR
European (including UK) Fire Rating Requirements for Data Cables
The introduction of the Construction Products Regulation (CPR) in 2017 updated the cable sheath fire rating requirements for data cables. Although the rating system was harmonised (Euroclass system), the implementation of CPR was down to each country’s national standards body. This means that the fire rating required in a particular location is both country and application specific. The majority of countries require Dca rated cables as a minimum for patch cables and Cca or higher for trunk cables.
Bca rated cables
Depending on application, some countries require Bca rated cables. Please contact us directly for Bca rated cables. Please contact us directly for these cables.
Plenum OFNP rated cables are not covered within EU/UK regulations
Plenum sheath is specified within regulations in the USA. Plenum sheath cables would not automatically meet with EU fire rating requirements.
CPR Compliant
Construction Products
Regulations
Generic verus Specific brand
MPO is the generic name for “multi-fibre push-on” connectors as opposed to single fibre connectors such as LC or SC. There are many manufacturers of MPO connectors each with varying degrees of performance. MTP® is a brand of MPO connector made by US Conec®.
All MPO connectors have a floating ferrule which is aligned using guide pins and help against the opposing MPO ferrule with a spring. The manufactured tolerance of the ferrule and the quality of the springs are key factors in determining the lifetime performance of the connector. MTP® connectors have a very low manufactured tolerance and a high spring force which ensures continued performance over time.
For more information – Differences between generic MPO connectors and the higher performing MTP® (MPO) connector.
Compatibility with QSFP-DD transceiver modules
- All QSFP-DD 400GBase-SR8 transceiver modules have ports with male connections (with guide pins).
- The MTP cable needs a female connector (no pins).
- Transceivers from the leading switch manufacturers such as CISCO, Juniper, Extreme, HP, Dell, Arista and Brocade all use an MT ferrule which is the same ferrule as used in the MTP® connector.
- All Complete Connect 400G cables use the MT Elite ferrule within the MTP 16 fibre connector. This provides the best optical connection with all major QSFP-DD transceivers. Some MPO connectors wont perform as well.
Cleaning MTP® (MPO) cables and transceiver ports
Complete Connect recommend using an IBC® MTP® cleaning tool for cleaning all MTP® cables and QSFP+ transceiver ports. These are in stock.
Maximum transmission distances
The IEEE standard states that 400G can be transmitted up to 100 m / 70 m over OM3 and up to 150 m / 100 m over OM4 respectively. In practice greater distances can be achieved.
Testing 40G or 100G ports or cables
An M800 Series loopback test cable can be used to test these ports.