Home > Transceivers > QSFP+ 40G Optical Transceivers > QSFP+ 40G PIR4 (PSM) Optical Transceiver Modules
QSFP+ 40G IR4 PSM (PIR4) Optical Transceiver Modules
40GBASE-IR4 (PSM) / PIR4 over Singlemode Fibre

Our QSFP+ 40GBASE-IR4 (PSM) transceiver is a parallel 40Gbps Quad Small Form – factor Pluggable (QSFP+) optical module. It provides increased port density and total system cost savings.
The QSFP+ 40G PIR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gbps operation for an aggregate data rate of 40Gbps on 2km of single mode fibre.
This unit comes with an MPO/MTP 12 fibre interface. Electrical connections are achieved through an MSA-compliant 38-pin edge type connector. The 40G QSFP+ IR4 (PSM) module operates by a single +3.3V power supply.
LVCMOS/LVTTL global control signals, such as Module Present, Reset, Interrupt and Low Power Mode – are available with the QSFP+ 40GBASE-PIR4 transceiver modules.
Complete Connect’s 40GBASE-IR4 (PSM) Quad Small Form Factor Pluggable QSFP+ transceivers are compliant with SFF-8431, SFF-8432 and IEEE 802.3 aq 10GBASE-SR.
These QSFP+ 40G PIR4 transceivers are for use in 40-Gigabit Ethernet links up to 400m over Multimode fibre. The transceiver is RoHS compliant and lead-free per Directive 2011/65/EU.
Specification Summary
Data Rate | 44.8 Gbps |
Data Rate per Channel | up to 1330nm |
Transmission Distance | 2km on Singlemode |
Form Factor | Hot Pluggable QSFP+ |
Port Type | MPO (MTP) |
Transmitter | Uncooled 4 x 10 Gbps @ 1330nm VCSEL |
Electrical Interface | XLPPI |
Power Consumption | < 3.5W |
Temperature Range | -0 to +70°C |
DDM | Yes |
Product Warranty | 25 year fully covered |
Compliance / Standards / Applications
QSFP+ MSA | Compliant SFF-8436 |
IEC | IEC/EN 61000-4-2, IEC-60825 |
FDA | 21 CFR 1040.10 and 1040.11 |
IEEE | Compliant IEEE 802.3ba |
Common Model Logic | Compatible |
RoHS-6 | Compliant |
Ethernet | 40GBASE-SR4 and 10GBASE-SR |
InfiniBand | QDR, DDR and SDR |
Digital Diagnostics | Via I2C interface |
Required Cabling
Direct Connection | M400 Series Patch Cords |
Breakout to Separate Channels | M400 Series Breakout Cables |
Port Cleaning | MPO / MTP Cleaning Tool |
Service
In stock | Yes – same day dispatch |
CC Price Promise | Yes – on a like for like product and service |
Technical Support | Yes – qualified technicians on tap |
All our transceivers are coded with the correct EEPROM (electrically erasable programmable read-only memory) to match your manufacturers codes. Not all manufacturers require a code, only the ones that try to tie you into buying their optics at inflated prices. Complete Connect have a professional team who are able to engineer code and new firmware releases from manufacturers to ensure we offer up to date compatibility with all major OEM, switch, router and storage device vendors.
Compatible to these brands
A – D
Brand | XXX Code |
3Com | 3CX |
Arista | ARX |
Aditran | ADX |
Alcatel Lucent | ALX |
Allied Telesis | ATX |
BDCOM | BDX |
Broadcom | BOX |
Brocade | BRX |
Ciena | CNX |
Cisco | CIX |
DCN | DCX |
Dell | DEX |
D-Link | DLX |
E – H
Brand | XXX Code |
EMC | EMX |
Emulex | EUX |
Enterasys | ENX |
Ericsson | ERX |
Extreme | EXX |
F5 | F5X |
Finisar | FIX |
Force10 | F1X |
Fortinet | FOX |
Foundry | FUX |
H3C | H3X |
HP | HPX |
Huawei | HUX |
I – P
Brand | XXX Code |
Intel | INX |
JDSU | JDX |
Juniper | JUX |
Linksys | LIX |
Marconi | MRX |
McAfee | MCX |
Moxa | MOX |
MRV | MRX |
NetGear | NGX |
NokiaSiemens | NSX |
Nortel | NOX |
PacketFront | PFX |
Planet | PLX |
Q – Z
Brand | XXX Code |
Qlogic | QLX |
Redback | RBX |
Riverstone | RSX |
Sixnet | SNX |
SMC | SMX |
SUN | SUX |
Telco | TLX |
TP-Link | TPX |
Transition | TNX |
Trendnet | TDX |
Vixel | VXX |
ZTE | ZTX |
ZyXEL | ZYX |
UK Supplied
Purchase from a UK company with all the benefits this offers.
Performance Warranty
We are very confident in the performance and reliability of our entire range of optical transceivers that we offer a lifetime performance warranty. This is combined with our outstanding service and support levels to ensure complete peace of mind.
DDM (Digital Diagnostic Monitoring)
Full DDM and reporting functionality is available via an I2C interface in real time, these parameters include; optical output power, optical input power, temperature, laser bias current and transceiver supply voltage.
Laser Safety
This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).
MSA Compliant
All our QSFP+ optical transceivers are built to MSA (Multi Source Agreement) standards and are extensively tested to ensure 100% compatibility with a huge range of leading switch and device manufacturers. Our eSR4 optics are fully compliant with:
QSFP+ MSA 8436.
SFF-8472 DDM monitoring
IEEE 802.3ba 40GBASE-SR4.
RoHS and lead-free as per directive 2011/65/EU.
Why choose optical transceivers from Complete Connect?
Complete Connect is a leading supplier of quality, high performance SFP, SFP28, QSFP+, QSFP28 and CFP optical transceivers. All our transceivers are built to MSA (Multi Source Agreement) standards and are extensively tested. 100% compatibility is assured with a huge range of leading switch and device manufacturers. Each transceiver offers performance and reliability and comes with an extensive warranty.
This is combined with our outstanding service and support levels to ensure complete peace of mind.