Menu

Home > Transceivers > QSFP28 100G Transceivers > QSFP28 IR4 Transceiver

QSFP28 IR4 100G Transceivers over Singlemode Fibre

QSFP28 100GBASE-IR4

QSFP+ SR4 40GBASE Transceiver
Data Rate (Per Channel) 25.78125 Gbps
Aggregate Bit Rate 103.125 Gbps
Transmission Distance 2 km on singlemode
Form Factor QSFP28
Transmitter Cooled DFB-based LAN-WDM transmitter
Electrical Interface 4 x 28 G Electrical Serial Interface (CEI-28G-VSR)
Power Consumption < 4.0 W
Compliance IEEE-802.3ba Clause 100GBASE-LR4
Wavelengths 1295.56, 1300.05, 1304.58, 1309.14 nm
Port LC Duplex
RoHS-6 Compliant Yes
Temperature Range -0 to +70°C
Product Warranty 25 year fully covered

Complete Connect offer a parallel 100Gbps IR4 QSFP28 optical module for 2km transmission on singlemode (SMF) fibre. This QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 25Gbps operation for an aggregate data rate of 100Gbps. The interface is via an MTP/MPO connector and proper alignment is ensured by the guide pins inside the receptacle. Electrical connection is achieved through an MSA-compliant 38-pin edge type connector and the module operates by a single +3.3V power supply. LVCMOS/LVTTL global control signals such as module present, reset, interrupt and low power mode are all available.

A 2-wire serial interface is available to send and receive more complex control signals and to receive digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility. It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.

The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA).

  • Compliant to the QSFP28 Multi-Source Agreement (MSA)
  • Compliant to IEEE 802.3bm 100GBASE PSM4

The high performance cooled LAN WDM EA-DFB transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 10km links and It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference.

The product is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP28 Multi-Source Agreement (MSA).

DDM (Digital Diagnostic Monitoring)

Full DDM and reporting functionality is available via an I2C interface in real time, these parameters include:
1. Optical Output Power  2. Optical Input Power  3. Temperature  4. Laser Bias Current  5. Transceiver Supply Voltage.

Laser Safety

This is a Class 1 Laser Product according to IEC 60825-1:2007. This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated (June 24, 2007).

MSA Compliant

All our QSFP28 optical transceivers are built to MSA (Multi Source Agreement) standards and are extensively tested to ensure 100% compatibility with a huge range of leading switch and device manufacturers.

Lifetime Performance Warranty

We are very confident in the performance and reliability of our entire range of optical transceivers that we offer a lifetime performance warranty. This is combined with our outstanding service and support levels to ensure complete peace of mind.

Our programming & 3rd party brand compatibility – 40G eSR4

All our transceivers are coded with the correct EEPROM (electrically erasable programmable read-only memory) to match your manufacturers codes. Not all manufacturers require a code, only the ones that try to tie you into buying their optics at inflated prices. Complete Connect have a professional team who are able to engineer code and new firmware releases from manufacturers to ensure we offer up to date compatibility with all major OEM, switch, router and storage device vendors.

A – D

Brand XXX Code
Arista ARX
Brocade BRX
Cisco CIX
Dell DEX

E – H

Brand XXX Code
Extreme EXX
Finisar FIX
H3C H3X
Hewlett Packard HPX
Huawei HUX

I – P

Brand XXX Code
Mellanox MNX

Q – Z

Brand XXX Code

Note:

Not all products across our transceiver, DAC and AOC product ranges are available with compatibility options for all the above brands.

Why Choose 100G CFP+ / QSFP28 optical transceivers, AOC and Direct Attach cables from the team at Complete Connect?

Designed around a universal hot swappable footprint all our CFP+ solutions come with an extensive range of performance and compatibility features.

Complete Connect is a leading distribution authority and supplier of quality, high performance 3rd party optical transceivers. All our transceivers are built to MSA (Multi Source Agreement) standards and are extensively tested to ensure 100% compatibility with a huge range of leading switch and device manufacturers.

We are very confident in the performance and reliability of our optical transceiver solutions that we offer a lifetime performance warranty. This is combined with our outstanding service and support levels to ensure complete peace of mind. In fact our Optical Transceivers are deployed within some of the worlds largest data centres and telecommunications companies as well as a large number of SME enterprise data centres and government agencies.

Fully compatible digital diagnostics functionality (DDM/DOM) are available via the MDIO for all CFP and QSFP28 transceivers and DAC cable options below: –

3COM, Arista, A10, Alcatel Lucent, Allied Telesis, Avaya, Brocade, Ciena, Cisco, Dell, D-Link, Emulex, Enterasys, Ericsson, Extreme, F5, Finisar, Force10, Fortinet, Foundry, HP, Huawei, Intel, Juniper, Linksys, Mellanox, NetGear Nokia Siemens, Nortel, Riverstone SMC, SUN, TP-Link Transition Networks, Trendnet, ZyXEL.

CALL

+44 (0)20 8286 6529

Back to Top