Menu

SFP+ 10G Direct Attach Copper (DAC) Cables

SFP+ to SFP+ – 10GBASE-CR 

SFP+ Direct attach DAC Cable
Part Number Please see below
Compatibility Please see below
Data Rate (Per Channel) 10.5 Gbp/s
Aggregate Bit Rate 10.5 Gbp/s
Transmission Distance Up to 12m (Passive), 15m (Active)
SFP+ End 1 SFP+ MSA SFF 8431, 8432 & 8471 Compliant
SFP+ End 2 SFP+ MSA SFF 8431, 8432 & 8471 Compliant
Power Supply Single 3.3V
Temperature Range -5 to +70°C
RoHS RoHS-6 compliant (lead-free)
Product Warranty 25 year fully covered

10GBASE-CR

Complete Connects SFP+ 10G Direct Attach Copper (DAC) cable assemblies offer customers a high performance, cost effective I/O solutions for 10G Ethernet and 10G Fibre Channel applications.

DAC SFP+ to SFP+ Cables offer the lowest cost connectivity for 10GBASE-CU as well as a high port density and low power requirement. For short distances DAC cables offer a lower cost alternative to SFP+ Transceivers and fibre patch cables.

There are 2 versions of Direct Attach Copper Cable; passive and active. Passive DAC Cables enable connection up to 12m. Active DAC cables have an increased distance (to 15m) and also have a reduced size cable diameter. Note – Some equipment brand will only accept active DAC cables.

Each DAC cable is programmed prior to dispatch with correct code to ensure it is compatible with the brand of equipment. All Complete Connect DAC cables are fully tested for compatibility prior to dispatch and are MSA (Multi Source Agreement) compliant.

MSA Compliant

All our Direct Attach Copper (DAC) cables are built to MSA (Multi Source Agreement) standards and are extensively tested to ensure 100% compatibility with a huge range of leading switch and device manufacturers. Our SFP+ DAC cables are fully compliant with MSA SFF 8431, 8432 and 8472.

Lifetime Performance Warranty

We are very confident in the performance and reliability of our DAC (direct attach copper) cables that we offer a lifetime performance warranty. This is combined with our outstanding service and support levels to ensure complete peace of mind.

Passive SFP+ DAC Cables

Part Number Passive / Active Distance
DPSP10SP10-000.5-XXX (*) Passive 0.5m
DPSP10SP10-001-XXX (*) Passive 1.0m
DPSP10SP10-002-XXX (*) Passive 2.0m
DPSP10SP10-003-XXX (*) Passive 3.0m
DPSP10SP10-005-XXX (*) Passive 5.0m
DPSP10SP10-007-XXX (*) Passive 7.0m
DPSP10SP10-008-XXX (*) Passive 8.0m
DPSP10SP10-009-XXX (*) Passive 9.0m
DPSP10SP10-010-XXX (*) Passive 10.0m
DPSP10SP10-012-XXX (*) Passive 12.0m

*See Compatibility Codes below

Active SFP+ DAC Cables

Part Number Passive / Active Distance
DASP10SP10-003-XXX (*) Active 3.0m
DASP10SP10-005-XXX (*) Active 5.0m
DASP10SP10-007-XXX (*) Active 7.0m
DASP10SP10-010-XXX (*) Active 10.0m
DASP10SP10-012-XXX (*) Active 12.0m
DASP10SP10-015-XXX (*) Active 15.0m

Our programming & 3rd party brand compatibility

All our Direct Attach Copper (DAC) cables are coded with the correct EEPROM (electrically erasable programmable read-only memory) to match your manufacturers codes. Not all manufacturers require a code, only the ones that try to tie you into buying their optics at inflated prices. Complete Connect have a professional team who are able to engineer code and new firmware releases from manufacturers to ensure we offer up to date compatibility with all major OEM, switch, router and storage device vendors.

A – D

Brand XXX Code
3Com 3CX
Arista ARX
Aditran ADX
Alcatel Lucent ALX
Allied Telesis ATX
BDCOM BDX
Broadcom BOX
Brocade BRX
Ciena CNX
Cisco CIX
DCN DCX
Dell DEX
D-Link DLX

E – H

Brand XXX Code
EMC EMX
Emulex EUX
Enterasys ENX
Ericsson ERX
Extreme EXX
F5 F5X
Finisar FIX
Force10 F1X
Fortinet FOX
Foundry FUX
H3C H3X
HP HPX
Huawei HUX

I – P

Brand XXX Code
Intel INX
JDSU JDX
Juniper JUX
Linksys LIX
Marconi MRX
McAfee MCX
Moxa MOX
MRV MRX
NetGear NGX
NokiaSiemens NSX
Nortel NOX
PacketFront PFX
Planet PLX

Q – Z

Brand XXX Code
Qlogic QLX
Redback RBX
Riverstone RSX
Sixnet SNX
SMC SMX
SUN SUX
Telco TLX
TP-Link TPX
Transition TNX
Trendnet TDX
Vixel VXX
ZTE ZTX
ZyXEL ZYX

Note:

Not all products across our transceiver, DAC and AOC product ranges are available with compatibility options for all the above brands.

Engineering Drawing

SFP+ Direct attach DAC Cable tech spec

Key Features

  • Hot pluggable SFP+ cable ends
  • Data rate up to 10.5Gbps
  • Full support for 1x, 2x, 4x, and 8x Fibre Channel applications
  • I/O connector designed for high speed differential signal applications
  • Improved pluggable form factor (IPF)
  • Single 3.3V power supply
  • Metal enclosure for lower EMI
  • Power consumption < 0.5W
  • AC coupling of PECL signals
  • Guaranteed DDM/DOM compatibility
  • Extensive laboratory testing
  • SR, LRM, ER, LR, ZR variants
  • Serial management interface
  • Lifetime performance warranty

Regulatory and Standards Compliance

  • SFP+ MSA SFF-8431 & 8432 (Optical Modules, Active Optical Cables, and Passive Twinax cables)
  • SFP+ MSA SFF-8461 (Active Twinax cables)
  • IEEE 802.3: 10-Gigabit Ethernet
  • ROHS-6

Applications

  • Storage Area Networks
  • Network Attached Storage
  • 1x, 2x, 4x, 8x Fibre Channel
  • Other Optical Links

CALL

+44 (0)20 8286 6529

Back to Top